GRASS VALLEY ATP-2000, User Manual

Page: 83 / 90

62
Battery Replacement
Battery Removal Procedure
Battery Removal Procedure
Preliminaries
Take note of the warnings and cautions in Important Safety Information , on page v.

In particular, take note of the:
• battery handling warnings (see Battery Handling , on page viii);
• electrostatic discharge (ESD) cautions and protection advice

(see Electrostatic Discharge (ESD) Protection , on page viii);
• lithium battery warnings (see Lithium Batteries , on page xiv); and
• battery disposal information (see Battery Disposal , on page xiv).
Requirements
• An anti-static work surface.
• A soft cloth on which to place the unit, display-side down, to protect the display.
• Replacement battery unit:
Battery unit: Grass Valley Part Number
ATP-BAT01
Tools Required
• Small tweezers.
• Medium sized Philips screwdriver.
• Double-sided adhesive tape.
Removal Procedure Steps
The battery replacement procedure is described below and assumes that the unit is rack-
mounted:
• Step 1: Uninstall ATP-2000 Panel Unit from Rack
• Step 2: Panel Unit Disassembly
• Step 3: Remove Battery Unit
• Step 4: Refit Battery Unit
• Step 5: Panel Unit Reassembly
• Step 6: Re-Install in Rack
IMPORTANT

Follow static precautions at all times when handling this equipment.
Servicing should be done in a static-free environment.