GRASS VALLEY ATP-2000, User Manual

Page: 50 / 90

29
ATP-2000
User Guide
Fig. 5-2: Home Screen - Select ‘Cards’ and ‘Card Type’
2 Select ‘Card Type’ on the right-hand side of the panel (RHS). For example, ‘XIP-UDC’ .
On the RHS, the Card Home screen is shown for the selected card type.
On the LHS, all cards/devices of the selected type that the GV Orbit system can manage
are listed on the left-hand side of the panel.
3 Select a card to control on the LHS.
Parameter controls are available on the RHS. See Figure 5-3.
Fig. 5-3: Parameter Controls Example
List of types of items or functions to
be controlled.

By default, ‘Cards’ is selected

(for Devices/Cards/Modules).
LHS RHS
For ‘Cards’ selected on LHS, the RHS shows a list of card
types to control.

Select an item type to control. For example, ‘XIP’.
Note: Supported card types are listed in Appendix A, Supported Devices ,
on page 45.

Early panel software version support a reduced list of devices and the
list will be expanded in further software versions.
Note: Items on screen may be grayed out if there are no cards/devices
present of that type in the system, or if they are not supported by
the ATP-2000 panel.
List of all cards of the selected type
that can be controlled by the user. Parameter control screen for the selected card.
Parameter controls
Card known by the panel and detected by the panel.
Card known by the panel, but not detected.
Selected card.