manualshive.com logo in svg

GRAPHTEC OPS676, User Manual, Page: 7 / 35

Share
Download
GRAPHTEC OPS676 User Manual Download Page 7

7

1. Introduction to the Controller

Starting the Controller

The controller can be started either from the print menu in the application software or the 

Start menu on the desktop.

   

CAUTION

 

• Before starting the controller, make sure that your computer and the plotter are connected 

properly and that media is set in the plotter.

• Cuttings other than test cuttings cannot be done when you start the controller from the Start 

menu.

• To start the controller from the print menu, [Start up the controller] must be checked. This option 

is in the [Options] tab of [Printing Preferences] in the driver software. (Only when connecting with 

USB interface)

   

Reference

 

For more information on operating the controller screen, see "Nomenclature (Main Screen)" (   

page 9).

Starting from the Print Menu

1.  Open an image that you want to plot in the appropriate application software.
2.  Select the print command from the menu.

   

Reference

 

Operations are different depending on the types of application software. For more information, see 

the manual provided with the application software.

3.  Select the plotter from the printer list.

* The screen above is an example of the Print screen of Notepad.

Summary of Contents for OPS676




































Reviews:

No comments