10
1. Introduction to the Controller
20
Help...
Displays the help of the controller.
Pressing the [F1] key on the computer keyboard at each screen
displays the help on the setting item.
21
Origin
Sets the current tool position as an origin point.
22
Use Keyboard*
3
Enables the position to be moved by using the [ ] keys on the
computer keyboard.
Up/down/
left/right
Press one of the [ ] keys on the keyboard.
High-speed
movement
Press the [Ctrl] key and one of the [ ] keys on
the keyboard at the same time.
Skew
Press the up/down arrow key and the left/right
arrow key at the same time. For example, [ ] and
[ ] or [ ] and [ ].
23
Position
*
3
Moves the tool to the desired position.
Up/down/
left/right
Press one of the , , , or .
High-speed
movement
Press the [Ctrl] key on the keyboard and , , , or
at the same time.
*1: Displayed only when the controller is started form the print menu.
*2: Displayed only when the controller is started form the Start menu.
*3: Can be operated when the plotter is in READY status.
Selecting Rotation
• When [Registration Marks] is off:
Set the cutting direction against the media.
To set in the plotter from upward of the image, select the upper option.
To set in the plotter from right side of the image using the roll media, select the lower option.
•When [Registration Marks] is on:
Set the direction to set the media printed by the printer in the plotter.
Select the upper option to insert the media in the plotter from the top of the image.
Select the lower option to insert the media in the plotter from the right side of the image.
For more information on registration marks, see "7. ARMS Setting [ARMS]" ( page 23).