29
9. Advance [ADV.]
In the main screen ( page 9), click [ADV.] to open the [Advance] screen.
In the [Advance] screen, you make environment settings for the plotter.
1
Language
Selection
Select the language in which menus are shown on the LCD screen
in the control panel of the plotter.
Select from [English], [Japanese], [Deutsch], [Francais], [Italiano],
[Espanol], [Portugues], [Russian], [Chinese] and [Korean]. This does
not change the display language of the controller.
2
Length Unit
Select the length unit that is shown on the LCD screen in the control
panel of the plotter. Select from [metric] and [inch]. This does not
change the display unit of the controller.
3
Move Step
Set the movement distance of the carriage and the media when one
of the [Position] keys ( ) is pressed. Select from [0.1 mm]
(0.004 inch) and [1.0 mm] (0.04 inch).
4
Media Sensor
Specify whether to use the sensor that checks if media is set and
detects the media length (in the feed direction).
Disabled
The sensor will not be used.
Enabled
The sensor will be used.
5
Fan Power
Set the air volume of the fan that sucks the media. Normally, select
[Normal]. For thin media, select [Weak].
6
Beep For Key Ope.
Specify whether to beep when a key on the control panel of the
plotter is pressed.
Off
Beep will not be generated.
On
Beep will be generated.
7
Push Roller
Sensor
Specify whether to use the push roller sensors that detect the width
of the media. Normally, select [Enabled].
( Chapter 10: Settings Regarding Operation Environment in
CE6000 User's Manual)
Disabled
The push roller sensors will not be used.
Inside Disabled*
1
The push roller sensors other than ones at the
edges will not be used.
Enabled
The push roller sensors will be used.
8
OK
Saves the settings and closes the [Advance] screen.
9
Cancel
Cancels the settings and closes the [Advance] screen.
*1: When more than three push rollers are used, the roller sensor(s) in midway will be disabled.
9
8
3
4
6
7
2
1
5