30
10. Option Settings
In the main screen ( page 9), click [Option] to open the [Option] screen.
In the [Option] screen, you select the plotter to be controlled by the controller, set the unit
to be used in the controller, initialize the media list, and make other settings. You can also
retrieve information
CAUTION
• On Windows Vista/7/8/8.1/10, the media list is saved for each logged-on user. If you want to use
the same media list as before, log on as the same user.
1
Driver (Select)
Specify the plotter for which you want to make settings in the
controller. From the [Select] pull-down list, select the driver for the
plotter for which you want to make settings.
2
Firmware
Displays the firmware information for the plotter corresponding to
the driver that is currently selected.
3
Unit
Specify the length unit to be used in the controller. Select from [mm]
and [inch].
4
Media List (Restore
to default)
Restores the media list to the default. Click [Execute], and a
message asking if you are sure to restore the media list to the
default appears. Click [OK] to restore to the default.
5
Plotter setting
The settings in the following screens are saved to the computer:
[Tools Setting], [Area Parameters], [Interface], [ARMS Setting],
[Media Setting], [Advance] and the saved settings can be loaded to
the controller.
Import/Export Functions in Plotter Setting (page 30)
6
Error Information
Retrieves and displays the error information on the plotter. Click
[Execute] to display the error information. Click [Save] in the [Error
Information] screen to save the information in text file format to the
computer.
7
Condition
Information
Retrieves and displays the condition information on the plotter. Click
[Execute] to display the condition information. Click [Save] in the
[Condition Information] screen to save the information in text file
format to the computer.
8
OK
Saves the settings and closes the [Option] screen.
9
Cancel
Cancels the settings and closes the [Option] screen.
9
8
6
5
4
3
2
1
7
Import/Export Functions in Plotter Setting
By using these functions, you can save settings that are set in the controller to any location on your
computer or load the settings that have been saved to your computer. The extension of the files that
can be imported or exported is ".GDS".
Export
1. Click [Export].
2. Enter the file name in the [Save As] screen and specify the location to which you
save the settings.
3. Click [Save] to save the settings.
Import
1. Click [Import].
2. Select the file to load in the [Open] screen.
3. Click [Open] to load the settings.