manualshive.com logo in svg

GRAPHTEC OPS676, User Manual, Page: 31 / 35

Share
Download
GRAPHTEC OPS676 User Manual Download Page 31

31

11. Simple mode

Nomenclature (Main Screen: Simple mode)

The information on CE6000 connected is displayed in the right side of the screen. 

The Tool Condition indicates the settings selected to each number (No.1 to 5). The default 

settings are applied to the initial value.

1

Condition No.

If the number in the list is changed, the set information on the left 

side of the screen is indicated on the right side.

2

Media Name

Sets the media to be used for CE6000.

3

Tool

Selects the tool to be used.

4

Force

Sets the pressure to cut.

5

Speed

Sets the speed to cut.

6

Apply

When this button is pressed after changing the respective settings, 

the changes are reflected on the left side of the screen.

7

Language Selection Selects the menu language to be displayed on the LCD display in 

the Plotter's Control Panel.

8

Help

Displays Help for the controller.

9

About

Displays the version information of the controller you are using.

10

Option

Returns the destination and cutting conditions set to the Plotter to 

the default settings.

11

Register

Saves, deletes, or loads the cutting conditions.

12

Receive

Receives the Tool Conditions (Standard Values) of the Plotter. 

Values   that are changed with the control panel on the Plotter will not 

be reflected.

13

Send

Sends the Tool Conditions (Standard Values) of the controller.

14

Close

Cancels the setting and closes the controller.

12

13

14

10 11

1
2

4

3

5

6

7

8
9

Summary of Contents for OPS676




































Reviews:

No comments