manualshive.com logo in svg

GRAPHTEC OPS676, User Manual, Page: 3 / 35

Share
Download
GRAPHTEC OPS676 User Manual Download Page 3

3

PREFACE

About This Manual

This manual explains how to set up and operate the cutting plotter ( the "plotter") by using 

the Cutting Plotter controller (the "controller") from a computer. 

For information on setting up the plotter and installing the software, see "Setup Manual". 

For the detailed operation with the Cutting Plotter controller, see the CE6000 User's Manual.

* Chapter 2 and Chapter 4 through Chapter 9 in this manual describe the operations and settings that 

can be done from the menu screen that is shown by pressing the [COND/TEST] key or the [PAUSE/

MENU] key on the operation panel of the plotter. Since the keys and menu items of the corresponding 

Cutting Plotter are showed in chapter titles, see in conjunction with the CE6000 User's Manual.

Symbols Used in This Manual

The following symbols are used in this manual.
CAUTION :  Used to indicate cautions and restrictions to be observed for proper operation. 

Be sure to read the description that follows this label.

Reference :  Used to indicate information useful for operation and additional explanations.

 

:  Used to indicate pages and User's Manuals that contain relevant information.

[   ] 

:  Used to indicate the keys on the computer keyboard and the buttons on the 

controller.

Summary of Contents for OPS676




































Reviews:

No comments