3-99
CHAPTER 3 Settings and Measurement
(4)-4 Repeated capturing
This is used to enable or disable the repeat function to conduct repeated capturing.
Selection item
Description
Off
The repeat function is disabled.
On
The repeat function is enabled. After one capture ends, the next capture starts (If the start
side source setting is not Off, this device waits for a trigger).
Repeat capture is available when the capturing destination is internal RAM or when the stop trigger is set.
Repeat interval mode and repeat interval
When the repeat capture function is set to On, you can set the time interval until the next recording starts.
The time interval range is set in the repeat interval mode.
< Repeat interval mode >
Setting
Description
Start - Start
Set the time from the previous capture start (including waiting for trigger) to the start of next
recording.
Stop - Start
Set the time from the previous capture stop to the start of next recording.
Captured data
Waiting for
trigger
Captured data
Waiting for
trigger
Stop - Start
Captured data
Waiting for
trigger
Captured data
Waiting for
trigger
Stop - Start
When the time interval between start and stop is set and the set time interval has passed at the end of the
capturing, repeat operation starts immediately.
When the repeat interval is set to 0 hour 0 minute 0 second, repeat operation starts immediately.
The repeat interval may be longer than the set time .
