3-106
CHAPTER 3 Settings and Measurement
Setting
Selection available
Notification
settings
Alarm
Set the E-mail send when an alarm occurs.
Off, On
Low battery
Set the E-mail send when the internal battery
lowers.
Off, On
Drive free space Set the E-mail send when the drive free capacity
during recording is low.
Off, On
Periodic
notifications
Set the periodic notification E-mail send.
Off, 1 hour, 2 hours, 3 hours, 6 hours, 12 hours,
Specified time
* Set the specified time to the hour : minute :
second.
E-Mail Send
Server Settings
Send (SMTP) Server Name
Set the E-mail Send Server Name (server
address).
Enter string up to 63 characters.
* Enter the domain name or IP address.
* Enter the server name notified from the mail
provider.
SMTP port number
Set the port number of the E-mail Send Server.
0 to 65535
* Enter the port number notified from the mail
provider.
Time zone
Set time zone.
UTC-12:00 to UTC+13:00
* This is a common setting for time zone setting
with POP3 server setting and NTP setting.
SMTP authentication method
Set the SMTP authentication method.
Off, POP before SMTP, SMTP-AUTH
SMTP-AUTH
Set the authentication method of SMTP-AUTH.
PLAIN, LOGIN, CRAM-MD5, DIGEST-MD5
POP3 server settings
Set it when POP before SMTP is selected in
SMTP authentication method.
Receive (POP3)
Server Name
Set the E-mail receiving server name (server
address).
Enter the string of up to 63 characters.
* Enter the domain name or IP address.
* Enter the server name notified from the mail
provider.
POP3 port
number
Set the port number of the E-mail receiving
server.
0 to 65535
* Enter the port number notified from the mail
provider.
Time zone
Set the time zone.
UTC-12:00 to UTC+13:00
* It is common setting with the time zone setting
of SMTP server setting and NTP setting.
POP3 encryption Set the encryption of POP3 server.
Off, StartTLS, Over SSL
* Set the encryption notified from the mail
provider.
The same as
SMTP
Set whether to use the same POP3 user name
and POP3 password as SMTP user name and
SMTP password.
No, Yes
POP3 user name Set the user name to log in to the POP3 server.
Enter the string of up to 63 characters.
POP3 password
Set the password to log in to the POP3 server.
Enter the string of up to 63 characters.
SMTP user name
Set the user name to log in to the SMTP server.
Enter the string of up to 63 characters.
SMTP password
Set the password to log in to the SMTP server.
Enter the string of up to 63 characters.
SMTP encryption
Set the encryption of the SMTP server.
Off, StartTLS, Over SSL
* Set the encryption notified from the mail
provider.
E-mail Address
Set your own E-mail address.
Enter the string up to 63 characters.
Test email
A test E-mail is sent.
Identification name
Set the specified name to be used in our
application (GL980-2000_APS).
Enter the string of up to 15 characters.
Apply Settings
Confirm TCP/IP settings and restart TCP/IP
processing.
