3-56
CHAPTER 3 Settings and Measurement
3 .5 Setting Menus
When you press the [MENU] key during Free Running, the following menu screens appear.
I/F
OTHER
TRIG
DISP
AMP
DATA
(1) AMP settings
This menu is used to specify input signal-related settings.
< Analog settings >
Setting
Selections available
Input
Off, DC, RMS, TEMP, RH
Range
[Voltage]
20, 50, 100, 200, 500mV; 1, 2, 5, 10, 20, 50, 100, 200, 500V; 1-5V
[RMS]
10, 25, 50, 100, 250, 500mVrms
1, 2.5, 5, 10, 25, 50, 100, 250Vrms
[Temperature]
TC-K, TC-J, TC-T, TC-R, TC-E, TC-B, TC-S, TC-N, TC-W
[Humidity]
100% fixed
Filter
Line, 5, 50, 500Hz, 5k, 50kHz
EU
(Scaling settings)
Function
Off, On
Dec pt
None, 1 digit, 2 digits, 3 digits, 4 digits after the decimal point
Meas.
Value
Upper limit
Set numeric value.
Lower limit
Set numeric value.
EU value Upper limit
Set numeric value.
Lower limit
Set numeric value.
Select
Cur, Length, Area, Volume, Velocity, Accel, Freq, Mass, Energy,
Pressure, Flow, Temp, Strain, Brightness, Concentration; Optional
Unit
The selections vary depending on the unit selected in the above.
(Enter arbitrary text: Up to 8 characters)
Misc.
Annotation text string
Enter text. (Max. 31 characters)
Inter-
CH Op
Settings
Function
Off, On
Operation Left-hand
side
CH number
Operator
+, -, ×, /
Righthand
side
CH number
Scaling
/1000000, /1000, ×1, ×1000, ×1000000
Operations
span
Dec pt
×1, ×10, ×100, ×1000, ×10000
Upper limit Set numeric value.
Lower limit Set numeric value.
Select
Cur, Length, Area, Volume, Velocity, Accel, Freq, Mass, Energy,
Pressure, Flow, Temp, Strain, Brightness, Concentration; Optional
Unit
The selections vary depending on the unit selected in the above.
(Enter arbitrary text: Up to 8 characters)
Span
settings
Upper limit
Set numeric value.
Lower limit
Set numeric value.
Set waveform color
0 to 31 for each of red, green, blue (RGB)
Line Thickness Setting
1 to 8 dots
Trace
Off, On
