3-88
CHAPTER 3 Settings and Measurement
(3)-3 XY display
Setting
Description
Display mode
Set the display mode of the screen.
Y-T, Y-T (full screen), Logging, XY
CH
Set the X- axis and Y- axis of XY graph.
CH1 to CH8
Trace
Set the trace of XY graph.
Off, On
Waveforms are not displayed on the screen when trace is Off. Also they are not displayed on
the digital display.
Position
Set the XY position.
0% to 100%
Vernier
Set the XY vernier.
40 to 100%
* The range depends on the range setting.
Span
Upper limit
Set the span.
You can set it when the analog CH in the Span mode is set on the axis.
Lower limit
Zero point
Automatic zero adjustment of the analog CH set to the X-axis and Y-axis is performed.
Origin
Set the origin position in the Y graph.
Center, Lower left
Execute
Initialize the XY position to the set origin.
Clear waveform at the start of
recording.
Set the enable or disable of XY waveform clearing at the start of capturing.
Off, On
XY display clear
Perform the XY waveform clear manually.
XY Overwrite
Select File
Select the image file to be overwritten and then perform the overwriting.
Overwrite clear The XY overwrite is cleared and completed.
CH (X-axis/Y-axis CH setting)
Set X-axis and Y-axis of XY graph.
You can select from among analog CHs.
Trace
Set the trace of XY waveform.
XY-CH which trace is set to Off is not displayed on the graph and the digital display.
