GRANULDISK Granule Maxi, Service Manual, Page: 52 / 97

7.2 Service instructions 2 year service 7 Maintenance and Service
Figure 27: Make sure the hole is not clogged and no granules.
k Check arms and locking device for damages,cracks.
l Mount o-ring on wash nozzles and mount the wash nozzles.
m Mount new bearings.
n Check that the pins on the shafts that interlock with the wash arms are firmly
fastened. If not, secure it with centre punch in the centre of shaft.
Figure 28: Make sure the pin is secured.
o Mount shaft on washer arm. Mount washer arm together with the shaft.
p Check that the washer arms are firmly locked with the locking device.
q Mount the washer and locking washers on the shafts.
r Mount the rocker arms and remount the screws.
3. Dismount and clean the washer arm motor fan cover and remount it.
4. Replace the y-piece in the rinse system (18056, 6005171):
a Check rinse hoses for damage exchange if necessary. (Normally not required)
b Undo the three hose clamps and exchange the y-piece on top of machine (rinse
system).
c Mount the new y-piece with new hose clamps.
5. Replace all rinse nozzles (20019):
52 Rev. 2012-05