GRANULDISK Granule Maxi, Service Manual, Page: 41 / 97

4 Programming 4.4 GD Memo™
3. Time for periodical service
— to avoid expensive repairs and unnecessary breakdowns. The STOP button (2) flashes
and a message is shown in the display. Either “Time for service 1” or “Time for service
2” depending on which service is required. Phone number for Service company or
GRANULDISK is shown below the service message. The reminder can be reset by an
authorised service technician, once the service is performed. OK is shown in the display
during 2 seconds after the reset. Service message appears every 8000 programmes or
once a year, whichever occurs first.
4. Alarm priority
If the reminders ”Change water”, ”Change Granules now” or ”Time for service” occurs at
the same time, the messages are prioritised as follows:
• “Change wash water” will always have first priority
• Once the water has been changed and the message reset, the next message can
be shown
• Second priority “Change Granules now”, “Time for service” are alternately displayed,
if issued at the same time.
• The reminders flash until messages are reset.
4.4.1 User menu entrance
Figure 22: Operators panel
1. Press the STOP button, release it and wait for 3 seconds,
2. Press the Short program button (4) five times.
Rev. 2012-05 41