GRANULDISK Granule Maxi, Service Manual, Page: 33 / 97

4 Programming 4.2 Flashloader 4.2
Figure 18: Running the machine with Flash Loader.
6. Update date and time in the PC settings by pressing “Set Time”. ( Figure 18 Running the
machine with Flash Loader. , on page 33 )
4.2.4 Flashloader for troubleshooting
1. Connect the computer by pressing “Autodetect” and then select “Run from Flash”. (if not
done in previous section.)
CAUTION
Only tick one function at a time.
Heaters can be turned on without water.
Pumps will only run if the doors are closed.
2. When the “Outports” field is white, the outputs can be forced remotely.
Rev. 2012-05 33