background image

Component Identification

3A2776K

15

User Interface

Buttons

LEDs

There are four types of LEDs on the display.

 

NOTICE

To prevent damage to soft key buttons, do not press 
the buttons with sharp objects such as pens, plastic 
cards, or fingernails.

F

IG

. 7: User Interface 

DA

DB

DD

DE

DF

DG

DH

DK

DP

DN

DM

DC

ti13365a

DR

DJ

Ref. Button

Function

DA

Display 
Screen

Use to view screens. See page 67.

DB

Start

Initiates Active Run Mode function currently 
selected in Run Screen.

DC

Stop

Terminates Active Run Mode function currently 
selected.

DD

Enter

Press to open drop-down fields, select options, 
and save values.

DE

Alarm Reset Resets alarms and advisories.

DF

Left/Right

Move between screens in run or setup modes.

DG

Function

Activates mode or action represented by the 
icon above each of the four buttons in the LCD.

DH

Up/Down

Move between drop-down fields, option boxes, 
and selectable values within Setup screens.

DJ

Setup Key 
Lock

Change ratio or enter Setup mode.

DR

USB Port

Connection for data download. 

Ref. LED

Function

DK

Blue

Dosing valve active

-

On - dosing valve is active

-

Off - dosing valve is not active

DM

Green

Spray mode active

-

Spray mode is on (active)

-

Spray mode is off (inactive)

DN

Red

Alarm

-

On - alarm is present

-

Off - no alarm

DP

Yellow

Warning

-

On - is active.

-

Off - no warning indicated. Ratio and 
setup fields are not changeable.

-

Flashing - key is present and turned. 
Ratio and setup fields are 
changeable.

Summary of Contents for XM PFP





































































































Reviews: