Installation
3A0294J
33
7.
Install the pressure sensor on the pump bleed port.
a.
Use a wrench to remove the pressure valve.
b.
Apply the supplied sealant to the adapter (33),
the manifold (34), and the pressure valve. Install
all three in the order listed. See F
c.
Disconnect pressure sensor at PT1.
d.
Install the o-ring (38) and pressure sensor (35);
use zip ties (32) to secure the cable to the ram
and air hose.
8.
Install cables. Reference the cable identification
table on the next page and F
. 63 for a diagram of
cable connections.
F
IG
. 60: Remove Pressure Valve
F
IG
. 61: Install Pressure Sensor
Pressure Valve
Pressure
Valve
33
34
35
38
F
IG
. 62: Breakout Module Connections
Pressure
Sensor
Extension
Air Motor
Cable
Cable
LCM Cable
Solenoid
Extension
Cable
Light Tower
Shot Status
Drum Low (1)/
Start/Stop (2)
Not Used
Changeover
Solenoid
Summary of Contents for SmartWare 262370
