Installation
32
3A0294J
e.
Place the o-ring (20) on the lift ring adapter (19),
and apply the supplied adhesive to the threads.
See F
f.
Route the linear sensor cable through the lift
ring adapter. Install the lift ring adapter; torque
to 30-36 ft-lbs (40.6-48.8 N•m). See F
g.
Route the linear sensor cable through the hole
on the lift ring adapter.
h.
Apply the supplied adhesive to the lift ring
threads. Install the lift ring; torque to 30-36 ft-lbs
(40.6-48.8 N•m). See F
i.
Remove the screw on the valve cover to
remove the cover. See F
j.
Install the reed switch sensor (22). Secure with
the 1 in. (25 mm) screw (24) and o-ring (23) pro-
vided. See F
k.
Connect the strain relief guide (26) to the reed
switch sensor. Use a wrench to tighten the 1/2
in. screw (25) on the strain relief guide and to
secure it to the top plate of the air motor.
l.
Use a zip tie to secure the reed switch sensor
cable.
m. Reinstall the valve cover, and tighten the nut.
n.
Remove round plug and route the linear sensor
cable through the opening in the back of the
cover. Snap the air motor cover back into place.
F
IG
. 57: Install Linear Sensor
13
18
19
Lift Ring
20
r_262
373_
3A02
94_af
ter_l
inear
F
IG
. 58: Install Reed Switch Sensor
F
IG
. 59: Install Strain Relief Guide
Screw
Cover
24
23
22
25
26
Summary of Contents for SmartWare 262370
