Graco SaniForce 515, Instructions For Use Manual

Page: 24 / 28

Performance Charts
24 3A1973L
Performance Charts
Fluid Outlet Pressure
Test Conditions: Pump tested in water with inlet submerged.
F
LUID OUT
LET PRESSURE—ps
i (MPa, b
ar)
100
(0.7, 7)
80
(0.55, 5.5)
60
(0.41, 4.1)
40
(0.28, 2.8)
20
(0.14, 1.4)
2
(7.6)
4
(15.2)
6
(22.7)
8
(30.3)
10
(37.9)
12
(45.4)
14
(53.0)
16
(60.6)
FLUID FLOW—gpm (lpm)
A
B
C
Fluid Pressure Curves
A
at 100 psi (0.7 MPa, 7 bar) air pressure
B
at 70 psi (0.48 MPa, 4.8 bar) air pressure
C
at 40 psi (0.28 MPa, 2.8 bar) air pressure
CYCLES PER MINUTE
standard diaphragms; overmolded diaphragms
46; 64 91; 128 137; 192 182; 256 228; 319 273; 383 319; 447
364; 511
To find Fluid Outlet Pressure (psi/MPa/bar) at a
specific fluid flow (gmp/lpm) and operating air pres-
sure (psi/MPa/bar):
1. Locate fluid flow rate along bottom of chart.
2. Follow vertical line up to intersection with
selected fluid outlet pressure curve.
3. Follow left to scale to read fluid outlet pressure.