Graco SaniForce 515, Instructions For Use Manual

Page: 8 / 28

Installation
8 3A1973L
Fluid Outlet Line 1. Use flexible grounded fluid hoses (J).
2. For best sealing results, use a standard tri-clamp or
DIN style sanitary gasket of a flexible material such
as EPDM, Buna-N.
3. Install a fluid drain valve (G) near the fluid outlet.
See the
WARNING , and F
IG
. 2.
4. Install a shutoff valve (H) in the fluid outlet line.
F
IG
. 2: Typical Floor-Mount Installation
A fluid drain valve (G) is required to relieve pressure in
the hose if it is plugged. The drain valve reduces the
risk of serious injury, including splashing in the eyes or
on the skin, or contamination from hazardous fluids
when relieving pressure. Install the valve close to the
pump fluid outlet. See F
IG
. 2.
ti17652a
Key:
A Air supply line
B Bleed-type master air valve
(required for pump)
C Air regulator/filter assembly
D Air line quick disconnect
E Master air valve (for accessories)
F Flexible fluid suction line
G Fluid drain valve (required)
H Fluid shutoff valve
J Flexible fluid line
Y Ground wire (required; see
page 6 for installation
instructions).
E
C
B
A
H
J
G
F
Y
D