Graco Metric CHECK-MATE 200, Instructions And Parts List

Page: 29 / 29

3X8–080
Rev. D
Supersedes Rev. B
and PCN C
Parts Change Notice
Some parts in Rev. B of manual 308–080 have changed but have not yet been changed in the
instruction manual. Please note the changes below and mark them in your manual or keep
this sheet with your manual.
Assembly No.
Series
Letter
Change
Part That
Changed
Ref
No. Part Description Description of Change
Model 222–771
Displacement
Pump – 184–108 12 Piston Guide Replaced by Part No. 184–425.
Other Changes
Page 12, 13: Change the torque for the packing nut (2) to 34–41 N.m (25–30 ft–lb). Change the torque for the cylinder
(11), intake valve housing (16), and intake cylinder (20) to 185–204 N.m (135–150 ft–lb).
Page 14: Add Connection Kit 236–071. The kit includes items 102, 104, 105, 106, 108, 109, and 113.
Add Model 237–203 Monark Pump. Items 101, 106, 108, 109, 110, and 113 are the same as for Model
222–782. Item 102 is 190–161 Tie Rod. Item 103 is 237–252 Connecting Rod. Items 104 and 105 are not
used. Item 107 is 237–202 Displacement Pump. Add item 114, 154–771 O-ring.
Page 15: Add Connection Kit 236–071. The kit includes items 102, 104, 105, 106, 108, and 113.
Add Model 237–205 President Pump. Items 101, 106, 108, and 113 are the same as for Model 222–783.
Item 102 is 190–161 Tie Rod. Item 103 is 237–251 Connecting Rod. Items 104 and 105 are not used. Item
107 is 237–202 Displacement Pump. Add item 114, 156–082 O-ring.
Page 16, 17: Change the torque for the packing nut (2) to 34–41 N.m (25–30 ft–lb). Change the torque for the cylinder
(11), intake valve housing (16), and intake cylinder (20) to 185–204 N.m (135–150 ft–lb).
Add Model 237–202 Displacement Pump. All parts are the same as Model 222–771 except: Item 1 is
190–160 Displacement Rod.
12/29/94