Graco Metric CHECK-MATE 200, Instructions And Parts List

Page: 18 / 29

18
ACCESSORIES
USE GENUINE GRACO PARTS AND ACCESSORIES
Must be purchased separately.
GROUNDING CLAMP 103–538
GROUND WIRE 208–950
7.6 m (25 ft) long,
1.5 mm (12 gauge)
0189
BLEED–TYPE MASTER AIR VALVE 107–142
21 bar (300 psi) MAXIMUM WORKING PRESSURE
Relieves air trapped in the air line between the pump air
inlet and this valve when closed. 1/2 npt(m) inlet x 1/2
npt(f) outlet.
0188
AIR LINE FILTER 106–149
17.5 bar (250 psi) MAXIMUM WORKING PRESSURE
1/2 npt(f) inlet and outlet
0236
AIR LINE LUBRICATOR 214–848
17.5 bar (250 psi) MAXIMUM WORKING PRESSURE
0.24 liter (8 oz) bowl capacity. 1/2 npt(f) inlet and outlet.
0237
AIR REGULATOR 104–266
21 bar (300 psi) MAXIMUM WORKING PRESSURE
0–18 bar (0–250 psi) Regulated Pressure Range;
1/2 npt(f) inlet and outlet.
0238
PUMP RUNAWAY VALVE 215–362
12 bar (180 psi) MAXIMUM WORKING PRESSURE
Shuts off air supply to the pump if the pump accelerates
beyond the pre–adjusted setting due to an empty supply
container, interrupted fluid supply to the pump, or exces-
sive cavitation. 3/4 npt(f) inlet and outlet.
0239
GROUNDED 13 mm (1/2 in.) BUNA–S AIR HOSE
12 bar (175 psi) MAXIMUM WORKING PRESSURE
Part No. ID Length Thd. Size
205–418 13 mm (1/2”) 1.8 m (6 ft) 1/2 npt(m)
205–216 13 mm (1/2”) 4.5 m (15 ft) 1/2 npt(m)
205–273 13 mm (1/2”) 7.6 m (25 ft) 1/2 npt(m)
208–594 13 mm (1/2”) 15.2 m (50 ft) 1/2 npt(m)
FLUID DRAIN VALVE
350 bar (5000 psi) MAXIMUM WORKING PRESSURE
Open to relieve fluid pressure in hose and gun/valve.
210–657 1/4 npt (mbe)
210–658
3/8 npt (mbe)
210–659
1/4 npt x 3/8 npt (mbe)
0240
FLUID REGULATOR 903–958
350 bar (5000 psi) MAXIMUM WORKING PRESSURE
Regulates fluid pressure to the gun or dispensing valve,
and dampens pressure surges. Spring operated, for
highly viscous fluids. 3/4 npt(f) inlet, two 3/4 npt(f) outlets.
0241