LL250 Compressor Installation
22
332230T
19. Place guard (20) over mounting bracket (11).
Located longest slot on vertical sides (3rd from
top), and align with mounting tabs. Install two flat
washers (21), two lock washers (22), and two
screws (23). Leave slightly loose. Press guard (20)
flush against fan guard (24). Ensure minimal (less
than 1/4 in.) or no gap between mounting bracket
(11) around perimeter. Tighten two screws (23) to
130-150in-lb (14.7-16.9 N•m).
20. Test operation of compressor by running unit.
Check for excessive vibration and/or wobble
between couplers (8) and flex insert (9). If present,
repeat horizontal and vertical alignment steps
(steps 16 and 17).
21. Use a 11/16 in. wrench and a 9/16 in. backup
wrench to attach the braided hose from the air tank
to the tee.
22. Reconnect the battery.