LL250 Pressurized Bead System Kit 25R270
16
332230T
7. Make sure left and right frame mounts are aligned.
The left leg should mirror the right leg location from
LL250 frame cross member.
8. Use 9/16 wrench to tighten bottom screws (M) to
hardware shown.
9. Assemble hopper bracket (X) and base (Y) with
hardware provided. Install carriage bolts with the
heads facing the paint tanks. Use 9/16 in. wrench
to tighten bolts.
2.674"
10. Install plastic end caps (Z) into frame. Use rubber
mallet to pound end caps into place.
Inches
Centimeter
ti20502a
ti20500a
M
ti24390a
ti20884a
Z