Meter Setup and Operation Instructions
12
3A1451C
3.
Squeeze the trigger.
Fluid begins to flow, and the amount shown on the
display counts up from zero.
4.
Release the trigger when you have dispensed the
desired amount of fluid.
Fluid flow stops, and the amount you have dis-
pensed is shown on the display (F
IG
. 16).
NOTE: When you release the trigger, the nozzle should
prevent fluid from running out of the extension. If fluid
does run out, see Replacing the Nozzle on page 18.
Viewing Totals
This is the procedure for viewing the non-resettable and
resettable totals in gallons or liters. To change the reset-
table total, see Resettable Total, page 9.
1.
If display is blank (in sleep
mode), press and hold either
the Total or Rest button.
2.
Press and hold Total button.
The resettable total amount is
displayed (F
IG
. 17).
If the unit of measurement is gallons, quarts, or
pints, the resettable total is displayed in gallons,
(F
IG
. 17). If the unit of measurement is liters, the
resettable total is displayed in liters.
F
IG
. 16
0D[LPXP:RUNLQJ3UHVVXUHEDU36,
*$/
476
376
/,7(56
5727$/
$872
ti12043a
F
IG
. 17
F
IG
. 18
*$/
476
376
/,7(56
5727$/
$872
0D[LPXP:RUNLQJ3UHVVXUHEDU36,
ti12049a
*$/
476
376
/,7(56
5
727$/
$872
0D[LPXP:RUNLQJ3UHVVXUHEDU36,
ti12050a