Meter Setup and Operation Instructions
8
3A1451C
Meter Setup and Operation Instructions
Setup
Terms
The following terms are shown on the display and/or
used often in this instruction manual.
•
R-TOTAL: Resettable Total
Shows the cumulative amount that has been dis-
pensed. Can be reset to zero.
•
TOTAL: Non–Resettable Total
Shows the cumulative amount that has been dis-
pensed for the life of the unit. Cannot be reset.
•
Standard Dispense Mode
Dispense mode in which display counts up from
zero or from where it recently stopped.
•
ASLEEP / AWAKE Mode
Asleep is a battery–saving mode in which the dis-
play goes blank after 45 seconds of inactivity. The
display comes Awake from sleep mode when you
press any button on the keypad or squeeze the trig-
ger to dispense fluid.
Keypad Buttons (F
IG
. 9)
•
TOTAL*
Displays the resettable total, non–resettable total,
and calibration factor.
•
RESET
*
Resets the displayed amount to zero or press to
enter the Standard Dispense Mode (see Terms).
* Press the hold Reset
and
Total
buttons simultaneously to dis-
play Setup Menus
(page 9).
NOTE: All buttons are disabled
while fluid is being
dispensed
F
IG
. 9
0D[LPXP:RUNLQJ3UHVVXUHEDU36,
*$/
476
376
/,7(56
5727$/
$872
ti12043A