Technical Data
3A1451C
19
Technical Data
* Tested in No. 10W motor oil. Flow rates vary with fluid pressure, temperature and viscosity.
** Battery required to meet safety approvals: Duracell
®
MN1604 or Eveready
®
EN22, 522
† At 2.5 gpm (9.5 lpm), at 70°F (21°C), with 10W motor oil and 1 gallon (3.8 l) dispensed. May require calibration;
out-of-box accuracy is +/-1.25 percent.
Duracell
®
is a registered trademark of Duracell Inc.
Eveready
®
is a registered trademark of the Eveready Battery Co., Inc.
Flow range*
01 to 5 gpm (0.4 to 19 lpm)
Maximum Working Pressure
1000 psi (69 bar)
Weight
3 lbs (1.36 kg)
Dimensions without extension/nozzle
Length
Width
Height
11 inches (28 cm)
3.25 inches (8.3 cm)
3.25 inches (8.3 cm)
Inlet
1/2” BSPT
Outlet
3/8” npt
Operating temperature range
32°F to 120°F (0°C to 49°C)
Storage temperature range
-30°F to 120°F (-34°C to 49°C)
Battery**
9 volt alkaline
Wetted parts
stainless steel, nitrile rubber, zinc, CS, LCP
Fluid compatibility
lubricating oils, antifreeze mixtures
Pressure loss
Accuracy†
90 psi (1.2 bar) @ 5 GPM
+/- 0.5 percent
Units of measurement
Maximum totalizer amount
Maximum recorded dispensed volume
pints, quarts, gallons, liters (factory set in quarts)
999.99 units
999.99 units