![background image](http://html1.mh-extra.com/html/graco/e-flo-17v232/e-flo-17v232_instructions-parts-list-manual_2251116022.webp)
Setup
Setup
Setup Screen
Screen
Screen 21
21
21
Use this screen to set your date format, date, time,
or force a restart of the system when updating the
software (update token inserted into the display).
After the software update is completed successfully,
the token must be removed prior to selecting the
Acknowledge key or power cycling the display. If an
update was concluded and the token is not removed,
pressing the Acknowledge key restarts the update
process.
NOTE:
NOTE:
NOTE: Refer to
for instructions on software
updating. Software update is disruptive to all pumps
connected to the display. All pumps attached to
the display must not be pumping material when the
software update is initiated.
Figure 28 Setup Screen 21
Setup
Setup
Setup Screen
Screen
Screen 18
18
18 Key
Key
Key
Select your preferred date format from
the menu.
• MM/DD/YY
• DD/MM/YY (default)
• YY/MM/DD
Set the correct date.
Set the correct time.
Perform a soft restart of the system.
Setup
Setup
Setup Screen
Screen
Screen 22
22
22
Use this screen to enter a password that will be
required to access the Setup screens. This screen
also displays the software version.
Figure 29 Setup Screen 22
Setup
Setup
Setup Screen
Screen
Screen 22
22
22 Key
Key
Key
Enter the 4–digit password.
Check the box to lock out the agitator
field in the Run screens.
Check the box to lock out the profile field
on the Run screens..
22
3A2527H