![background image](http://html1.mh-extra.com/html/graco/dyna-star-77x000/dyna-star-77x000_instructions-manual_2253486019.webp)
Repair
332514J
19
Repair
Seal Replacement
Kits 24T860 - HP Models or 24T861 - HF Models
•
Reference numbers used in the following instruc-
tions refer to Parts pages beginning on page 35.
•
Upper case letters used in the following instructions
refer to Typical Installation provided on page 6 or 7.
•
Lower case letters used in the following instructions
refer to component parts or user provided parts.
•
Unless otherwise noted, keep all parts for reassem-
bly. Inspect and clean parts as needed prior to using
them for reassembly.
•
Use all new parts included in kit for reassembly.
Disassembly
1. Disconnect Dyna-Star pump from main power
source.
2.
Relieve pressure
(see Pressure Relief procedure,
page 8).
3. Disconnect Timer/Controller (F) (user supplied, if
used).
4. Disconnect High Pressure Lubricant Supply Line (D)
to the Lubricant Output Connection (0) (F
IG
. 11) on
the Vent Valve or Manifold.
5. Loosen bolts (128) and remove cover (126) from
Dyna-Star pump (F
IG
. 17).
6. Remove screws (a) and washers (b) holding
Dyna-Star Pump to cover and remove pump from
cover (F
IG
. 18). Place pump on a workbench or
table top protected with a drop cloth.
F
IG
. 16: Lubricant Outlet Connection
0
D
F
IG
. 17
F
IG
. 18
126
128
a
b
Summary of Contents for Dyna-Star 77X000
Page 45: ...Notes 332514J 45 Notes...