![background image](http://html1.mh-extra.com/html/graco/dyna-star-77x000/dyna-star-77x000_instructions-manual_2253486010.webp)
Wiring
10
332514J
8. Connect the timer/controller (F) (user supplied, if
used).
9. Connect High Pressure Lubricant Supply Line (D) to
the Lubricant Output Connection (0) (F
IG
. 11) on the
Vent Valve or Manifold.
NOTE:
The High Pressure Lubricant Supply Line
(D) is disconnected from the Lubricant Output Con-
nection (0) during Priming, page 15.
Wiring
Grounding
System Configuration and Wiring
NOTE:
Cable wiring harness kits are available from
Graco. See Parts page 38 for a complete list of available
kits.
Fuses
F
IG
. 10
F
IG
. 11: Lubricant Outlet Connection
126
128
0
D
The equipment must be bonded (grounded)
directly to the truck. Grounding reduces the risk of
static shock due to static build up on the
equipment.
NOTICE
Fuses (user supplied) are required on all models. To
avoid equipment damage:
•
Never operate the Dyna-Star Pump models without
a fuse installed.
•
A fuse of the correct voltage and amperage must
be installed in line with the power entry to the sys-
tem. Graco recommends using 35A fuses.
Summary of Contents for Dyna-Star 77X000
Page 45: ...Notes 332514J 45 Notes...