![background image](http://html1.mh-extra.com/html/graco/advanjet-diaphragm-jet-hv-2000/advanjet-diaphragm-jet-hv-2000_setup-and-operation_2251220020.webp)
Page 20 of 60
Advanjet HV-2000C Jet Controller Setup and Operation
3A5856A
4.2
Changing the Default RS-232 Settings
The default settings for the RS-232 data interface are CTS ON, Baud Rate 57600,
Parity NONE, and Data Length 8BIT. To change the default RS-232 settings,
simultaneously press the LEFT and RIGHT keys twice. (Pressing L+R one time displays
the + settings; pressing L+R a second time displays the RS-232 default settings.)
Use the LEFT/RIGHT keys to cycle through the settings. The selected setting will have
a blinking cursor. Use the UP/DOWN keys to cycle through the setting options:
SETTING
DEFAULT
OPTIONS
CTS (hardware handshake)
ON
ON or OFF
Baud Rate
57600
57600, 19200, 9600 or 4800
Parity
NONE
NONE, EVEN or ODD
Data Length
8BIT
8BIT or 7BIT
To accept the new RS-232 interface settings, simultaneously press and hold the LEFT
and RIGHT keys. The LCD display will return to the main menu.
Note:
Remember to check the RS-232 settings in the Advanjet Controller program. The
settings in the HV-2000C controller should be the same as the settings in the program.
The Advanjet Controller program and the HV-2000C controller will not be able to
communicate with each other when they have different RS-232 settings.
Figure 4-2: Press LEFT+RIGHT Keys Twice for the Default RS-232 Settings