![background image](http://html1.mh-extra.com/html/graco/3a7639a/3a7639a_instructions-manual_2251219023.webp)
Install the Red Lion
™
Crimson
®
3.0/3.1 Software
3A7639A
23
Download the Preconfigured Database to the Gateway Module
Graco can supply a preconfigured database as a setup
file for the Gateway, containing parameters which com-
municate between the Gateway and various Graco con-
trol platforms. The file name has a .cd31 extension.
Red Lion Crimson 3.0/3.1 files are downloaded to the
Gateway module using the Link menu. The program-
ming link between the PC and the Gateway module
uses the USB cable. Before downloading, check that the
Communications Port is set to USB, as follows.
NOTE:
During programming the Gateway module may
ask for an updated driver. Follow the instructions on the
screen to automatically find and select the drivers.
1.
Go to Start>Programs>Graco>Red Lion Crimson
3.0/3.1 and run the program. The Red Lion Crimson
3.0/3.1 main page will appear.
2.
Using the Link pulldown menu, select Options to
open the Link Options window. Check that the Com-
munications Port is set to USB, and click OK.
3.
Go to File>Open and select the file with the xx.cd31
extension. The file name should appear at the top of
the window once loaded.
4.
Download the database using the Link>Update
command. As a shortcut, use the Update symbol on
the toolbar. See F
NOTE:
Downloading typically takes only a few sec-
onds but may take longer if the software has to
update firmware on the Gateway module.
F
IG
. 19 Red Lion Crimson 3.0/3.1 Main Page
F
IG
. 20: Set Communications Port to USB