Install the Gateway Assembly Hardware
3A7639A
11
Communication Connections
See F
IG
. 9 and F
IG
. 10 for typical cable connections in a
ProMix 2KS system.
F
IG
. 11 and F
IG
. 12 show other possible cable connec-
tions.
Refer to your Graco system manual for communication
protocol and connection requirements to complete your
specific Gateway Assembly installation. System manu-
als have details for protocol and connections.
For example,
2-wire twisted pair
cable, with shield wire.
See
on page 16 for
pin connections.
Communication Wire/Cable (to PLC).
This connection is protocol dependent.
USB Port
Models 25B471/2/3
come with 50 ft. of the
twisted pair cable for
an RS485 connection.
F
IG
. 5: Gateway Ethernet Assembly Cable Connection Points - Model 25B471
•
A Graco EasyKey (ProMix 2KS) requires an RS485
connection. See F
•
An DCM/ADCM (ProControl 1KE Plus and
Intelligent Paint Kitchen) requires a fiber optic
converter and connection. See F
•
An ACS controller can use an RS485 or EtherNet
switch; determine the protocol to be used and make
the appropriate connection. See F