Graco 24N572, Setup

Page: 41 / 120

Setup
3A2797ZAA 41
20.I
nstall High Volume Fill Kit (Optional) .
a. Perform Pressure Relief Procedure , page 43.
b. Close the ball valves located on the day tanks.
c. Insert the refill valve onto the ball valve.
d. Connect the air tube from the “open” port on
the refill valve to the fitting on the solenoid
valve that is located inside the tank stand base
cube.
e. Remove the plug from other port on the sole -
noid valve and install the air tube fitting.
f. Connect the air tube from the “close” port on
the refill valve to the fitting installed in step e
above.
21.I
nstall Low Volume Fill Kit (Optional) .
a. Perform Pressure Relief Procedure , page 43.
b. Close the ball valves located on the day tanks.
c. Remove the swivel fitting from the day tank
inlet port ball valve.
d. Insert the refill valve onto the ball valve.
e. Install the swivel fitting onto the refill valve
assembly.
f. Remove the air tube fitting installed on the sole -
noid valve located inside the tank stand base
cube.
g. Install the air tube fitting provided with the kit
into the open port on the solenoid valve.
h. Install the air tube from the refill valve to the
solenoid valve.
F
IG
. 24: High Volume Refill Kit
r_24m419_3a1961_1a
F
IG
. 25: Low Volume Refill Kit
r_24m418_3a1961_1a