Grace Company QuiltMotion Assembly Instructions Manual Download Page 40

Page: 40 / 198

4-10: Place Sewing Machine or Top Plate at an

angle on the carriage.

Note: This step will require 2 people.

4-11: Thread the free end of the Short Belt into the

gear box in the QuiltMotion Motor Plate from the

top until it comes out the bottom of the carriage.

Note: Keep the belt flat without any twists.

4-12: Loop the Short Belt over and feed it back

through the gear box and back out the top of the

Bottom Carriage.

Note: The belt teeth should be facing towards the

gear teeth.

4-13: Pull the rest of the Short Belt through the

QuiltMotion Motor Plate.

Q-Zone Queen Frame QuiltMotion

Teeth

Summary of Contents for QuiltMotion







































































































































































































Search results

Summary of Contents for QuiltMotion

Reviews:

Related manuals for QuiltMotion

Brands by name

Popular brands

Grace Company QuiltMotion, Assembly Instructions Manual

Search results

Summary of Contents for QuiltMotion

Reviews:

Related manuals for QuiltMotion

Brands by name

Popular brands