Grace Company QuiltMotion Assembly Instructions Manual Download Page 2

Page: 2 / 198

Warranty

1-800-264-0644

Warranty Information for your QuiltMotion.

The QuiltMotion has a One-Year limited warranty on all parts. The Grace Company will repair or replace,

at its discretion, any part with problems due to our manufacturing or defects in materials. This warranty

does not cover parts damaged through misuse, improper storage, improper assembly, loss, natural

events, and willful destruction. Parts must be returned to the Grace Company, shipping prepaid, before

we can repair or replace them. We will promptly return the repaired/replaced part at our expense if done

within a year of the purchase date.

Warranty

QuiltMotion

Summary of Contents for QuiltMotion







































































































































































































Search results

Summary of Contents for QuiltMotion

Reviews:

Related manuals for QuiltMotion

Brands by name

Popular brands

Grace Company QuiltMotion, Assembly Instructions Manual

Search results

Summary of Contents for QuiltMotion

Reviews:

Related manuals for QuiltMotion

Brands by name

Popular brands