GPX 250r TSE, Maintenance Manual

Page: 35 / 104

GPX MOTO
- 28 - www.GPXMOTO.com + www.GPXMOTOUK.com
If it is difficult to rebound the front shock absorber, decrease the rebound damping appropriately.
When the ambient temperature is high, the front shock absorber should also be properly bled of air
using the bleed button on the top of the fork cap. Push the bleed button for 5 seconds to release all of
the air. This air bleed button is located in front of the rebound knob that you can see in the photo
beneath.
ADJUSTING THE REBOUND DAMPING OF THE FRONT FORKS
Adjusting Steps as follows:
1. Check the front shock absorber, to determine
whether there is a need to adjust the rebound
damping
2. Turn clockwise to increase rebound damping.
Turn counter clockwise to rebound damping.
This is the same for both the left and the right fork.
ADJUSTING THE DAMPING OF FRONT FORKS
Adjusting Steps as follows:
1. Check the front shock absorber, to determine
whether there is a need to adjust the damping
2. Adjust the damping by rotating using your
fingers to turn the knob.
Turn clockwise to increase damping,
Turn counter clockwise to decrease damping.
This is the same for both the left and the right fork.
ADJUSTING THE HANDLEBAR