GPX 250r TSE, Maintenance Manual

Page: 64 / 104

GPX MOTO
www.GPXMOTO.com + www.GPXMOTOUK.com
- 51 -
COOLING SYSTEM
COOLING SYSTEM PROFILE
The excess heat from the engine is captured by the
water and antifreeze (coolant)within the cooling
system. This coolant is circulated around the engine
and through 2 radiators by a coolant pump that is
mounted within the engine . As the coolant passes
through the radiators the air passing through the
radiators reduces the temperature of the coolant.
If the antifreeze in the tank does not match the
specified value, it can’t work properly and thereby the
motor may be damaged.
The antifreeze level should be checked before each ride
to ensure it has the correct level.
To prevent the metal parts in the cooling system from
rust, erosion or freezing , the coolant must have the
required level of antifreeze within it.
。
WARNING
：
Antifreeze is a kind of chemical
reagent and may cause problem to human body, pls
read the instruction carefully before using.
WARNING : Using wrong antifreeze may cause
damage to motor and cooling system. Pls choose the
antifreeze with chemical inhibitor.
REMOVING OR INSTALLING THE RADIATOR AND PROTECTION GRILL
Check the radiators to see if there are any leaks of
coolant or any damage.
If there is dirt on the radiator this may stop the cooling
process , so it is important that the radiator is kept clean
by rinsing it with water.
NOTE : Do not use high-press water to do the wash,
this may cause damage and effect the heat transfer.
What’s more, do not install the unauthorized spare
parts, which may disturb heat transfer and thereby
damage the motor due to overheat.