GPX 250r TSE, Maintenance Manual

Page: 72 / 104

GPX MOTO
www.GPXMOTO.com + www.GPXMOTOUK.com
- 59 -
LUBRICANT REPLACEMENT
When replacing the lubricating oil, it should be done
before the engine is warm and has not yet cooled, so as
to ensure that the lubricating oil in the crankcase can be
discharged quickly and completely. When replacing,
place an oil pan under the engine and unscrew the oil
bolt A to release the lubricating oil. Check the plug
gasket for damage, and replace it with a new one if it is
damaged. When the lubricating oil is completely
discharged, install and tighten the oil drain
bolt and gasket. The tightening torque is:
15
～
20N·m. Refill with 800ml of new lubricating oil
and check the oil position.