GPS Prueftechnik Digital Colour Analyzer, User Manual, Page: 23 / 28

02.11.2018 23
4.6 Get stored RGB Value and Intensity
The get data commands are used to read out the Colour, Saturation and Intensity data stored by the capture
commands.
Transmit Description Receive Example Comment
getrgbi# b
# = channel no.
1..5 b
or
# = 1….495 Get stored RGB Value and Intensity
rrrr gggg bbbb iii getrgbi3 5
getrgbi23
0062 3018 0638 3 # = 1..5 if b = board
# = 1..495 at max. 99
boards
b not specified
Output format
Description:
In the described example the data of LED 3 of the board 5 are numbered all the way through or read out LED 23.
The values are for
Red 006 , for Green 230 , for Blue 018 and for intensity 06383.
Transmit Description Receive Example Comment
gethsi# b
# = channel no.
1..5 b
or
# = 1….495 get stored HUE Value, Saturation and
Intensity hhh.hh sss iiiii gethsi3 5
gethsi23
123.47 089 04383 # = 1..5 if b = board
# = 1..495 at max. 99
boards
b not specified
Output format
4.9 Get stored XY Chromaticity Value
Transmit Description Receive Example Comment
getxy# b
# = Channel no.
1..5 b
or
# = 1….495 get XY Chromaticity Value
0.xxxx 0.yyyy getxy1 4
getxy16
0.6461 0.3436 # = 1..5 if b = board
# = 1..495 at max. 99
boards
b not specified
Output format
4.7 Get stored RGB colour components by persent
4.8 Get stored HUE Value, Saturation and Intensity
Transmit Description Receive Example Comment
getcolor# b
# = fibernr. 1..5 or
# = 1..495 Get stored RGB colour components
in percent rrr ggg bbb getcolor3
getcolor13
getcolor3 2
010 068 022 # = 1..5 if b = board
# = 1..495 at max. 99
boards
b not specified