GPS Prueftechnik Digital Colour Analyzer, User Manual, Page: 20 / 28

02.11.2018 20
4. Capture Commands for the LED Analyzer
4.1. Connection Test
Transmit Description Receive Example Comment
testcon Connection test OK oder xOK testcon 2 OK x = number of boards
Description:
This command tests the connection between the test system/PC and the Analyzer.
If only one board is connected to the tester and the connection works the Analyzer will transmit the character
OK .
If several boards are connected the number of the boards is transmitted like 2 OK .
Important: This command has to be sent as first command so that all connected boards will be recogniced.
4.2. Standard Capture
Captures and stores the colour and Intensity of the LEDs.
Transmit Description Receive Example Comment
capture Start Capture Colour, Saturation Intensity OK capture OK Capture all boards
and sensors with the
current set up
Description:
This command instructs the LED Analyzer to capture and store the colour and intensity of all LEDs simultaneously.
With the command „setcaptimexyz b“ the capture time and sensor area can be set before the real capture.