Operating Instructions
PROFITEST H+E TECH
Page
10
Connecting the Inline Tester to a Charging Point and a Vehicle
The inline tester is equipped with a type 2 plug (7) for connection to the charging point. This can
be plugged into the charging point. The device is also equipped with a type 2 socket for connection
to the vehicle.
Diagnosis of the Charging Point and the Vehicle with the Inline Tester
Charging points can be tested in accordance with IEC 61851 with the help of the PROFITEST H+E
TECH
inline tester
in combination with an electric vehicle.
The device makes the following functions available:
Display of the Vehicle State (CP)
States A, B, C and D can be displayed in accordance with IEC 61851. Symbols corresponding to the
various vehicle states appear at the display (see pages 6 and 8).
Display
Status
Voltage U/L
Meaning
A
+12 V ... -12 V
No vehicle
B
+9 V ... -12 V
Vehicle connected
C
+6 V ... -12 V
Ready without
ventilation
D
+3 V ... -12 V
Ready with ventilation
Cable Display (PP)
The inline tester is equipped with a 20 A charging cable. The corresponding value (20 A) appears at
the display.
Display
Resistance
Max. Permissible Current
680 Ω
20 A
www.
GlobalTestSupply
.com
Find Quality Products Online at:
