5/4 X 2-5/8 X 42"
SUN SUPPORT
FASTEN 2" WOOD SCREWS
FROM THIS SIDE
2 X 6 X 16" SUN
NOTE: THE TOP OF THE SCREW HEAD SHOULD BE FLUSH TO THE SURFACE OF THE SUN.
4"
4"
2 X 6 X 16"
SUN
1"
3
4
"
1
8
"
STEP 58: SUNBURST
1: PRE-DRILL HOLES IN THE THREE 2 X 6 X 16" SUNS TO THE PATTERN SHOWN BELOW WITH A 1/8" DRILL BIT.
2: PLACE THE 2 X 6 X 16" SUN CENTERED AGAINST THE 5/4 X 2-5/8 X 42" SUN SUPPORT. FASTEN THE SUN TO THE SUN
SUPPORT WITH 2" WOOD SCREWS. REPEAT THIS PROCESS TWO MORE TIMES. WHEN YOU ARE FINISHED, YOU
SHOULD HAVE THREE ASSEMBLIES SIMILAR TO THE ONE SHOWN BELOW.
3: PRE-DRILL HOLES IN EACH END OF THE THREE 5/4 X 2 X 16" LARGE RAYS, AND THE EIGHTEEN 5/4 X 2 X 10" SMALL
RAYS TO THE PATTERN SHOWN BELOW WITH A 1/8" DRILL BIT.
94
