2 X 6 X 90"
ROPE LADDER SUPPORT
OFFSET HOLES DOWN
2 X 4 X 58"
BOTTOM PANEL
BOARD
OFFSET HOLES
DOWN
2 X 4 X 90"
ROPE LADDER RUNNER
OFFSET HOLES DOWN
5/16" WASHER
5/16 X 4-1/2"
HEX BOLT
STEP 7: FRAMING THE FRONT OF THE FORT
1: LAY THE 2 X 4 X 90" ROPE LADDER RUNNER AT THE FRONT OF THE FORT AT THE BOTTOM OF THE CORNER POSTS.
THE OFFSET HOLES IN THE ROPE LADDER RUNNER MUST FACE DOWNWARD.
2: USE 5/16 X 4-1/2" HEX BOLTS AND 5/16" WASHERS TO ATTACH THE HOLES OF THE ROPE LADDER RUNNER TO THE T-
NUTS INSTALLED ON THE CORNER POSTS.
3: LAY THE 2 X 4 X 58" BOTTOM PANEL BOARD ON THE FRONT CORNER POSTS IN THE MIDDLE OF THE CORNER POSTS.
THE OFFSET HOLES IN THE BOTTOM PANEL BOARD MUST FACE DOWNWARD.
4: USE 5/16 X 4-1/2" HEX BOLTS AND 5/16" WASHERS TO ATTACH THE HOLES OF THE BOTTOM PANEL BOARD TO THE T-
NUTS INSTALLED ON THE CORNER POSTS.
5: LAY THE 2 X 6 X 90" ROPE LADDER SUPPORT ON THE FRONT CORNER POSTS.
6: USE 5/16 X 4-1/2" HEX BOLTS AND 5/16" WASHERS TO ATTACH THE BOTTOM HOLES OF THE ROPE LADDER SUPPORT
TO THE T-NUTS INSTALLED ON THE CORNER POSTS.
7: DO NOT INSTALL LAG SCREWS AT THIS TIME.
43
