MARK THE LOCATION AT 30"
TIE KNOT JUST ABOVE THE MARK AT 30"
ROPE LADDER STEP 2 X 4 X 24"L
MARK HERE
THERE SHOULD BE
APPROXIMATELY
10" BETWEEN THE
ROPE LADDER
STEPS AFTER TYING
KNOTS.
AFTER THE LAST
STEP IS PLACED
ON THE ROPES,
TIE A KNOT IN EACH
ROPE DIRECTLY
ABOVE THE STEP.
MEASURE AND MAKE MARK AT
19" BEFORE KNOT IS TIED. TIE KNOT
BELOW
THE MARK.
TOP SIDE
OF STEP
STEP 78: ROPE LADDER ASSEMBLY
1: FIND SIX ROPE LADDER STEPS AND THE THREE 15' LENGTHS OF ROPE. MEASURE 30" FROM
ONE SIDE OF EACH PIECE OF ROPE AND MAKE A MARK AT THIS LOCATION.
2: TIE A KNOT JUST
ABOVE
THE MARK THAT WAS MADE ON THE ROPE (SEE BELOW).
3: THREAD THE ROPE THROUGH THE HOLES OF THE 2 X 4 ROPE LADDER STEP. YOU MAY NEED
TO TWIST THE ROPE TO GET IT THROUGH.
4: MAKE SURE THE ROPE LADDER STEP JUST INSTALLED IS RESTING AGAINST THE TIED KNOTS.
(NOW SEE FIGURE BELOW) MEASURE 19" FROM THE TOP SIDE OF STEP AND MARK THIS
LOCATION ONTO EACH ROPE.
5: TIE A KNOT
BELOW
EACH MARK THAT WAS MADE. THREAD EACH ROPE THROUGH THE
HOLES IN THE NEXT ROPE LADDER STEP. THERE SHOULD BE APPROXIMATELY A 10" SPACE
BETWEEN THE STEPS AFTER THE KNOTS ARE TIED.
6: CONTINUE THIS PROCESS UP THE ROPE, AND WHEN THE LAST STEP HAS BEEN PLACED, TIE A
KNOT DIRECTLY ABOVE IT. THE LAST STEP TIED WILL BE THE TOP OF THE ROPE LADDER.
114
