Gorilla Playsets 1500CWR, Manual, Page: 51 / 119

BOTTOM
2" WOOD
2" WOOD
ANGLE
ANGLE
SUPPORT
PANEL
BOARD
2 X 6
SCREW
SCREW
2 X 4 X 18"
SCREW
SCREW
3" WOOD
SUPPORT
2-1/2"
WOOD
2 X 4 X 13"
3" WOOD
SCREW
THE TOP OF THE ANGLE
STEP 6B: ANGLE SUPPORTS
4: AT THE TOP USE 2-1/2" WOOD SCREWS THROUGH THE DECK SUPPORT INTO THE ANGLE
SUPPORT TO THE CORNER POST.
SUPPORT SHOULD BE FLUSH OR LOWER THAN THE TOP OF THE DECK SUPPORT.
3: FOUR 2 X 4 X 13" ANGLE SUPPORTS ARE MOUNTED UNDER THE DECK ON THE FRONT
AND REAR OF THE PLAY SET TO THE 2 X 4 DECK SUPPORTS.
SUPPORT. AT THE BOTTOM USE ONE 2" AND ONE 3" WOOD SCREW TO FASTEN THE ANGLE
1: TWO 2 X 4 X 18" ANGLE SUPPORTS ARE MOUNTED UNDER THE DECK ON THE LEFT SIDE
OF THE PLAY SET TO THE 2 X 6 BOTTOM PANEL BOARD. THE TOP OF THE ANGLE SUPPORT
SHOULD BE FLUSH OR LOWER THAN THE TOP OF THE DECK SUPPORT.
2: AT THE TOP USE 2-1/2" WOOD SCREWS THROUGH THE ANGLE SUPPORT INTO THE
BOTTOM PANEL BOARD. AT THE BOTTOM USE ONE 2" AND ONE 3" WOOD SCREW TO
FASTEN THE ANGLE SUPPORT TO THE CORNER POST.
TOP OF ANGLE SUPPORTS
SHOULD BE FLUSH OR LOWER
THAN THE DECK SUPPORT.
DETAIL B
2 X 4 X 18"
PANEL
BOARD
BOTTOM
SCALE 1 : 8
ANGLE
ANGLE
SUPPORT
SUPPORT
2 X 6
2 X 4 X 13"
DECK
SUPPORT
B