background image

398309

Built-in glass ceramic induction hob is intended solely 

for use in households. Our products are packed in 

environment-friendly materials which can be safely 

recycled, disposed of, or destroyed. Respective packaging 

materials are labeled accordingly. When the appliance is 

outdated and you intend to dispose of it, please make 

sure this is done in an environment-friendly manner. Take 

it to an authorized collection center for waste household 

appliances.

Instructions for use have been prepared for the user, and 

describe the particulars and handling of the appliance. 

These instructions apply to diff erent models from the 

same family of appliances, therefore you may fi nd 

information and descriptions that may not apply to your 

particular appliance.

The appliance should be connected to the power supply 

in accordance with the instructions from the chapter 

“Electrical connections” and in line with the standing 

regulations and standards. The connections should be 

carried out by a qualifi ed personnel only.

The rating plate with basic information is located 

underneath the appliance.

Appliances are allowed to be mounted on one side next 

to a high kitchen cabinet, the height of which may exceed 

that of the appliance. On the opposite side however, only a 

kitchen cabinet of equal height as the appliance is allowed.

Dear customer !

Instructions for use

Installation instructions

Rating plate

Fire hazard protection

2

GLASS CERAMIC INDUCTION BUILT-IN 
COOKING HOB

Summary of Contents for IT65KR





























Reviews: