background image

398309

• This appliance can be used by children aged from 8 years 

and above and persons with reduced physical, sensory or 
metal capabilities or lack of experience and knowledge 
if they have been given supervision or instruction 
concerning use of the appliance in a safe way and 
understand the hazards involved. Children shall not play 
with the appliance. Cleaning and user maintenance shall 
not be made by children without supervision.

• WARNING: The appliance and its accessible parts become 

hot during use. Care should be taken to avoid touching 
heating elements. Children less than 8 years of age shall 
be kept away unless continuously supervised.

• WARNING: Danger of fi re: do not store items on the 

cooking surfaces.

• WARNING: Unattended cooking on a hob with fat or oil 

can be dangerous and may result in fi re. Never try to 
extinguish a fi re with water, but switch off  the appliance 
and then cover fl ame with a lid or a damp cloth.

• After use, switch off  the hob element by its control and 

not rely on the pan detector.

• WARNING: If the surface is cracked, switch off  the 

appliance to avoid the possibility of electric shock.

• Metallic objects such as knives, forks, spoons and lids 

should not be placed on the hob surface since they can 
get hot.

• Do not use steam cleaners or high-pressure cleaners to 

clean the cooking hob, as this may result in an electric 
shock.

• The appliance is not intended to be controlled by external 

timers or special control systems.

4

IMPORTANT - READ BEFORE USING THE 
APPLIANCE

Safety percautions

Summary of Contents for IT65KR





























Reviews: