398309
• Installation of the appliance into a kitchen worktop and its connection to the power mains may
only be performed by an adequately qualifi ed technician.
• Veneer or other fi nish of the piece of kitchen furniture into which the hob is to be built in
should be treated with heat resistant glue (100°C); otherwise, the worktop fi nish may be
discolored or deformed.
• Cooking hob is dimensioned to be built into the worktop over a piece of kitchen furniture, with
a width of 600 mm or more.
• After installation, the front two fastening elements should be freely accessible from below.
• Hanging, or wall-mounted kitchen elements should be installed high enough not to interfere
with the work process.
• The distance between the cooking hob and the kitchen hood should be no less than indicated
in the instructions for kitchen hood installation. The minimum distance is 650 mm.
• The distance between the appliance edge and the adjacent tall kitchen furniture element
should amount to no less than 40 mm.
• Use of massive wood decoration plates or boards on the worktops behind the cooking hob is
permitted, if the minimum distance remains the same as indicated in the installation drawings.
• Minimum distance between the built-in cooking hob and the rear wall is indicated on the
installation drawing.
18
Important warnings
INSTALLATION
Summary of Contents for IT65KR
Page 27: ......
