398309
• Connections may be carried out by a qualifi ed
technician only. The earthing protection must comply
with the standing regulations.
• Connection terminals are revealed when the connection
box cover is removed.
• Prior any attempted connection check that the voltage
indicated on the rating plate is in line with your home
power supply.
• The rating plate is located underneath the appliance.
• The appliance is manufactured for use with the power
supply voltage 230 V ~.
• The electric wiring should be equipped with a circuit
breaker able to isolate the appliance from the mains
in all points, with the distance between terminals of
at least 3 mm in open position. This may be done by
means of fuses, safety switches, etc.
• The connection should be selected in accordance with
the declared charge capacity of the mains and the fuse
power.
• Such appliances are allowed to be mounted on one
side next to a high kitchen cabinet, the height of which
may exceed that of the appliance. On the opposite side
however, only a kitchen cabinet of equal height as the
appliance is allowed.
• Upon the completion of installation, live wires and
isolated cables must be adequately protected against
accidental touching.
ATTENTION !
Before attempting any repairs on the appliance,
disconnect the power supply. In accordance with the
mains voltage the appliance should be connected in line
with the attached diagram. The earthing wire (PE) must
be connected to the terminal marked with the earthing
symbol
.
The connection cable must lead through the relief safety
device, protecting it from accidental pulling out. Upon the
completion of installation switch all the hotplates on for
about 3 minutes to check the proper functioning.
Use a fl at screwdriver to open the connection clip.
When connecting the appliance, use the jumper
connectors supplied.
24
CONNECTION TO THE POWER SUPPLAY
Summary of Contents for IT65KR
Page 27: ......
